Plating and Metal Finishing
Products
FTI ULTRAChem Pumps
Latest line of rugged, mag-drive centrifugal pumps by FTI developed specifically for heavy-duty and extreme chemical processes.
Read more
Gizmo Engineering T4 Digital Timer – Battery Power
T4 digital process control timer counter counts down then sounds an alarm. Large numerical display in compact 4" x 4" x 2" NEMA 4x, waterproof enclosure plus extra long-lasting, lithium battery included.
$259.96 – $282.27 Select options
Gizmo Engineering T5 Digital Timer – AC Power with Relay
T5 AC-powered, digital process control timer counter counts down then sounds an alarm. Large, backlit numerical display in compact 4" x 4" x 2.75" NEMA 4x, waterproof enclosure plus relay controls other devices up to 10A, 1/2 HP @ 120V, N.O. or N.C. and auxilliary 9VDC output can power dataloggers, autodialers or other external devices.
$327.86 – $350.17 Select options
Wilden P2 Metal Pumps 1-Inch
Wilden 1-inch, air-operated, double-diaphragm (AODD) metal pumps provide the durability, chemical-resistance, abrasion-resistance and temperature range required in a variety of demanding process applications. Flow rate to 45 GPM with maximum operating pressure at 125 PSI. Choose the elastomer based on its temperature limit:
Buna 10 - 180 degrees F
Neoprene 0 - 200
PTFE 40 - 300
Wil-Flex minus 40 - 225
$966.15 – $1,501.00 Select options
Wilden P2 Plastic Pumps 1-Inch
Wilden 1-inch, air-operated, double-diaphragm (AODD) plastic pumps in the P2 Original Series install fast and easily and provide a rugged, reliable design in a robust disposition for a wide range of demanding process applications. P2 flow rate to 37 GPM. Choose the elastomer based on its temperature limit:
Buna 10 - 180 degrees F
Neoprene 0 - 200
PTFE 40 - 300
Wil-Flex minus 40 - 225
$1,250.20 – $3,097.95 Select options
Finish Thompson KC Series Horizontal Magnetic Drive Pumps
Finish Thompson KC Series horizontal magnetic drive pumps feature a plastic design to handle highly corrosive liquids. A dependable performer since 1990, the pump end includes the motor adapter and drive magnet. The standard motors come in 56C NEMA face for the KC6 and above (FTI pumps under the 6 have special motors) & 184TC face for the KC22 & 32. The below pump specs are listed for 3450 RPM, 60HZ motors. If you need different motor option specs, please call or chat! Please note: Below Finish Thompson pumps do NOT include motors since these are offered as an option to the pump end.
$720.36 – $7,309.40 Select options
Flux Pumps F Series Sealless Tubesets
Flux Pumps F Series sealless tubesets feature versatile, lightweight drum pumps and container pumps that handle a wide range of liquids. Offered in a wide range of specifications, pumps are ideal for transferring abrasive liquids. Click on the model number or to find out the model needed, use the selector menu to choose from polypropylene, PVDF or stainless steel, the max flow and head, and discharge tube length. Or call for free guidance!
$561.18 – $1,493.66 Select options
Penguin Series A-A In-Tank Filter Systems
Penguin Series A-A in-tank filter systems mount the pump and filter chamber together inside or outside the tank. With no metal to contact the solution, these A-A in-tank filter systems are ideal for precious metals and are proven to operate with no possible solution loss. Choose from eight different styles and configurations. Click on the model number or to find out the model needed, use the selector menu to choose the motor phase, flow rate, and the type of pump and chamber combination. Or call or chat for free guidance!
$1,062.10 – $1,588.40 Select options
Penguin Series C Filter Chambers
Penguin Series C filter chambers feature a unique cartridge compressor design that accepts a wide cartridge length variance without liquid bypass while eliminating the center rod, springs and tubes. Choose from more than 30 styles and configurations to accommodate a huge range of requirements such as pressure, temperature, cost and more. Click on the model number or to find out the model needed or use the selector menu to choose from CPVC, polypropylene or PVDF, number of chambers and their diameter and flow rate, and the inlet/outlet connections. Or call or chat for free guidance!
$381.90 – $13,076.76 Select options
Penguin Series P Sealless Vertical Pumps
Penguin Series P sealless vertical pumps feature a trouble-free design that eliminates the need for bushings, bearings and seals - and there's no metal to contact the pumping solution. Click on the model number needed or to find out the model needed, use the selector menu below. Choose from CPVC, polypropylene or PVDF for the pump body material, the motor phase, the max head and max flow, and the sizes of the suction, discharge and impeller, then the motor HP. Call or chat for free guidance!_
$502.35 – $4,228.12 Select options
Sethco P90 Sealless High-Power Drum Pumps
Sethco P90 drum pumps empty 55-gallon drums in less than two minutes. Offered in a wide range of models with a one-piece tube in a choice of polypropylene or stainless steel for beer, wine and sanitary applications. Click on the model number or to find out the model needed, use the selector menu to choose from polypropylene, PVDF or stainless steel, discharge tube length and more. Or call for free guidance!
$530.47 – $1,534.55 Select options
Wilden 1-inch T2 M2 Series Metal Pump Repair Kits
Wilden 1-inch T Series Metal Pump Kits feature genuine Wilden parts. Choose the standard repair kit with diaphragms, valve balls, valve seat o-rings and more or select a series of upgrades for superior performance and extended service life. For free guidance on selecting the ideal kit, call or chat!
$214.26 – $1,186.73 Select options
Finish Thompson DB Series Horizontal Magnetic Drive Pumps
Finish Thompson DB Series horizontal magnetic drive pumps are offered in more than 30 different styles and configurations. Click on the model number or to find out the model needed use the selector menu to choose from polypropylene or PVDF for aggressive fluids, max flow to 136 GPM and max head to 98 feet, and the sizes of the suction, discharge and impeller. Or call or chat for free guidance!
$377.20 – $5,714.12 Select options
Flux F Series Tubesets with Seals
Flux Pumps F Series tubesets with seals feature a proven, mechanical seal design for extended pump service life. The drum pumps and container pumps handle a wide range of adhesives and similar liquids. Click on the model number or to find out the model needed, use the selector menu to choose from polypropylene, PVDF, aluminum alloy or stainless steel, the max flow and head, and discharge tube length. Or call or chat for free guidance!
$567.76 – $1,585.78 Select options
Penguin Series A-B In-Tank Filter Systems
Penguin Series A-B in-tank filter systems mount the pump and filter chamber together entirely inside the tank. With no metal to contact the solution, these A-B in-tank filter systems are ideal for precious metal filtration and are proven to filter with no possible solution loss. Choose from nearly 20 different styles and configurations with flow rates ranging from 100 - 2,150 gph. Click on the model number or to find out the model needed, use the selector menu to choose the motor phase, flow rate, and the type of pump-motor-chamber combination. Or call or chat for free guidance!
$1,035.50 – $3,450.40 Select options
Penguin Series CN In-Tank Filter Chambers w/ B Mount
Penguin Series CN in-tank filter chambers eliminate the potential for solution loss. Choose from 16 different styles and configurations to accommodate a huge range of requirements such as pressure, temperature, cost and more. Click on the model number or to find out the model needed or use the selector menu to choose from CPVC, polypropylene or PVDF, number of chambers and their diameter and flow rate, and the inlet/outlet connections. Or call or chat for free guidance!
$452.20 – $1,899.05 Select options
