pvdf


Products

Flux drum pump concentrated acids
Flux Drum Pump Kit Concentrated Acids

This Flux drum pump kit for concentrated acids comes complete with everything needed for transferring these challenging acids from 55-gallon drums and other containers. Old kit# 458.6K.007.

From
$2,667.72
Select options
Wilden P2 plastic pump 1P2R-14 uses compressed air
Wilden P2 Plastic Pumps 1-Inch

Wilden 1-inch, air-operated, double-diaphragm (AODD) plastic pumps in the P2 Original Series install fast and easily and provide a rugged, reliable design in a robust disposition for a wide range of demanding process applications. P2 flow rate to 37 GPM. Choose the elastomer based on its temperature limit:
Buna 10 - 180 degrees F
Neoprene 0 - 200
PTFE 40 - 300
Wil-Flex minus 40 - 225

From
$1,250.20$3,097.95
Select options
Finish Thompson KC Series Horizontal Magnetic Drive Pumps

Finish Thompson KC Series horizontal magnetic drive pumps feature a plastic design to handle highly corrosive liquids. A dependable performer since 1990, the pump end includes the motor adapter and drive magnet. The standard motors come in 56C NEMA face for the KC6 and above (FTI pumps under the 6 have special motors) & 184TC face for the KC22 & 32. The below pump specs are listed for 3450 RPM, 60HZ motors. If you need different motor option specs, please call or chat! Please note: Below Finish Thompson pumps do NOT include motors since these are offered as an option to the pump end.

From
$720.36$7,309.40
Select options
Flux Pumps sealless
Flux Pumps F Series Sealless Tubesets

Flux Pumps F Series sealless tubesets feature versatile, lightweight drum pumps and container pumps that handle a wide range of liquids. Offered in a wide range of specifications, pumps are ideal for transferring abrasive liquids. Click on the model number or to find out the model needed, use the selector menu to choose from polypropylene, PVDF or stainless steel, the max flow and head, and discharge tube length. Or call for free guidance!

From
$561.18$1,493.66
Select options
Penguin Series C Filter Chambers

Penguin Series C filter chambers feature a unique cartridge compressor design that accepts a wide cartridge length variance without liquid bypass while eliminating the center rod, springs and tubes. Choose from more than 30 styles and configurations to accommodate a huge range of requirements such as pressure, temperature, cost and more. Click on the model number or to find out the model needed or use the selector menu to choose from CPVC, polypropylene or PVDF, number of chambers and their diameter and flow rate, and the inlet/outlet connections. Or call or chat for free guidance!

From
$381.90$13,076.76
Select options
Penguin Series P Sealless Vertical Pumps
Penguin Series P Sealless Vertical Pumps

Penguin Series P sealless vertical pumps feature a trouble-free design that eliminates the need for bushings, bearings and seals - and there's no metal to contact the pumping solution. Click on the model number needed or to find out the model needed, use the selector menu below. Choose from CPVC, polypropylene or PVDF for the pump body material, the motor phase, the max head and max flow, and the sizes of the suction, discharge and impeller, then the motor HP. Call or chat for free guidance!_

From
$502.35$4,228.12
Select options
Sethco-P90-Drum-Pump
Sethco P90 Sealless High-Power Drum Pumps

Sethco P90 drum pumps empty 55-gallon drums in less than two minutes. Offered in a wide range of models with a one-piece tube in a choice of polypropylene or stainless steel for beer, wine and sanitary applications. Click on the model number or to find out the model needed, use the selector menu to choose from polypropylene, PVDF or stainless steel, discharge tube length and more. Or call for free guidance!

From
$530.47$1,534.55
Select options
FTI Finish Thompson DB magnetic drive pumps
Finish Thompson DB Series Horizontal Magnetic Drive Pumps

Finish Thompson DB Series horizontal magnetic drive pumps are offered in more than 30 different styles and configurations. Click on the model number or to find out the model needed use the selector menu to choose from polypropylene or PVDF for aggressive fluids, max flow to 136 GPM and max head to 98 feet, and the sizes of the suction, discharge and impeller. Or call or chat for free guidance!

From
$377.20$5,714.12
Select options
Flux F Series pumps
Flux F Series Tubesets with Seals

Flux Pumps F Series tubesets with seals feature a proven, mechanical seal design for extended pump service life. The drum pumps and container pumps handle a wide range of adhesives and similar liquids. Click on the model number or to find out the model needed, use the selector menu to choose from polypropylene, PVDF, aluminum alloy or stainless steel, the max flow and head, and discharge tube length. Or call or chat for free guidance!

From
$567.76$1,585.78
Select options
Penguin Series CN In-Tank Filter Chambers w/ B Mount

Penguin Series CN in-tank filter chambers eliminate the potential for solution loss. Choose from 16 different styles and configurations to accommodate a huge range of requirements such as pressure, temperature, cost and more. Click on the model number or to find out the model needed or use the selector menu to choose from CPVC, polypropylene or PVDF, number of chambers and their diameter and flow rate, and the inlet/outlet connections. Or call or chat for free guidance!

From
$452.20$1,899.05
Select options
Finish Thompson SP self-priming pumps
Finish Thompson SP Series Self-Priming Pumps

Finish Thompson SP Series self-priming pumps are offered in a wide range of specifications to suit your wet process. Pumps are ideal for pumping liquids from pits, tanks, railcars, and tanker trucks to bulk storage, process and day tanks, and for other applications too difficult for ordinary centrifugal pumps. Click on the model number or to find out the model needed, use the selector menu to choose from polypropylene or PVDF, the max head and max flow, and the sizes of the suction, discharge and impeller. Or call for free guidance!

From
$1,367.12$4,337.80
Select options
Sethco 500 Series Magnetic Drive End Suction Pumps

Sethco 500 Series Magnetic Drive End Suction Pumps are offered in a wide range of specifications. Click on the model number or to find out the model needed use the selector menu. Choose from glass-reinforced polypropylene or PVDF, the motor phase, max flow and max head, and the type of motor. Or call or chat for free guidance! These Sethco pumps are ideal for highly corrosive or mild chemicals, acids or solvents and more and are the frequent choice in water, wastewater, agriculture and aquatic systems.

From
$1,544.40$2,586.76
Select options
Finish Thompson PF Series drum pumps
Finish Thompson PF Series Drum Pumps – High Flow

Finish Thompson PF series drum pumps deliver high performance in container-to-container fluid transfer. These powered, portable FTI drum pumps feature a unique double suction impeller that provides high flow and high head for the safe, easy transfer of a wide range of acids, bases, plating solutions and more. Please note: drum pumps and motors are sold separately.

From
$410.55$1,305.60
Select options
Penguin Series CT carbon treatment chambers
Penguin Series CT Carbon Treatment Chambers

Penguin Series CT carbon treatment chambers come in more than 20 styles and configurations to accommodate a wide range of requirements such as pressure, temperature, carbon capacity, cost and more. Click on the model number or to find out the model needed use the selector menu to choose from CPVC, polypropylene or PVDF, the number and type of carbon bags and flow rate, and the inlet/outlet connections. Or call or chat for free guidance!

From
$1,246.40$2,893.70
Select options
Sethco 500 pump
Sethco 500 Series Magnetic Drive Self-Priming Pumps

Sethco 500 Series magnetic drive self-priming pumps are offered in a wide range of specifications. Click on the model number or to find out the model needed use the selector menu. Choose from glass-reinforced polypropylene or PVDF, the motor phase, max flow and max head, and the motor HP. Or call or chat for free guidance! These Sethco pumps are ideal for pumping, transferring and filtering acids, caustics, bleaches and more and are the frequent choice in water, wastewater, agriculture and aquatic sysems.

From
$1,938.15$4,376.17
Select options
Wilden P4 PX4 plastic pumps
Wilden P4 Plastic Pumps 1.5-Inch

Wilden 1.5-inch, air-operated, double-diaphragm (AODD) plastic pumps in the P4 and PX4 Original Series install fast and easily and provide a rugged, reliable design in a robust disposition for a wide range of demanding process applications. P4 flow rate to 206 GPM with maximum operating pressure at 125 PSI. Choose the elastomer based on its temperature limit:
Buna 10 - 180 degrees F
Neoprene 0 - 200
PTFE 40 - 300
Wil-Flex minus 40 - 225

From
$2,942.15$3,876.95
Select options