Freight


Products

Finish Thompson FTI Air FT15 air pump - choose PVDF or Polypro
FTI Air FT15ZP Polypro Pumps 1-1/2-Inch

The one and a half-inch, FT15ZP in polypropylene comes in a wide choice of diaphragms with a polypropylene center section, and polypropylene air valve and valve seats for acids, oils, coatings, plating and more. The latest in air pump technology from Finish Thompson.

From
$2,006.40$2,622.00
Select options
FTI Finish Thompson DB magnetic drive pumps
Finish Thompson DB Series Horizontal Magnetic Drive Pumps

Finish Thompson DB Series horizontal magnetic drive pumps are offered in more than 30 different styles and configurations. Click on the model number or to find out the model needed use the selector menu to choose from polypropylene or PVDF for aggressive fluids, max flow to 136 GPM and max head to 98 feet, and the sizes of the suction, discharge and impeller. Or call or chat for free guidance!

From
$355.12$5,390.28
Select options
Penguin Series PX extended vertical sealless pumps
Penguin Series PX Extended Sealless Vertical Pumps

Penguin Series PX extended sealless vertical immersible pumps feature an all-plastic, CPVC design to thrive handling acids, alkalines and other corrosives. Standard motors are three phase, totally enclosed and fan cooled. Long-wearing bearing is easy to replace. Click on the model number needed or to find out the model needed, use the selector menu below. Choose the max flow up to 250 with max head 115, then the motor HP. Call or chat for free guidance!

From
$3,241.12$7,358.32
Select options
Wilden PX8 metal pumps
Wilden T8, P8, Metal Pumps 2-Inch

Wilden 2-inch, air-operated, double-diaphragm (AODD) plastic pumps in the P8 and PX8 Original Series install fast and easily and provide a rugged, reliable design in a robust disposition for a wide range of demanding process applications. P8 flow rate to 155 GPM with maximum operating pressure at 125 PSI. Choose the elastomer based on its temperature limit:
Buna 10 - 180 degrees F
Neoprene 0 - 200
PTFE 40 - 300
Wil-Flex minus 40 - 225

From
$1,691.95$2,704.65
Select options
Sethco 2500 Series Magnetic Drive End Suction Pumps

Sethco 2500 Series Magnetic Drive End Suction Pumps are offered in a wide range of specifications. Click on the model number or to find out the model needed use the selector menu. Choose from glass-reinforced polypropylene or PVDF, the motor phase, max flow and max head, and the type of motor. Or call or chat for free guidance! These Sethco pumps are ideal for highly corrosive or mild chemicals, acids or solvents and more and are the frequent choice in water, wastewater, agriculture and aquatic systems. Max flow to 250 GPM with a max head of 105, 2.5-in. inlet / 2-in. outlet.

From
$6,363.14$9,138.50
Select options
Yamada NDP-40 AODD pump cast iron
Yamada NDP-40 Series 1-1/2 Inch AODD Pumps

Yamada 1-1/2-inch, air-operated, double-diaphragm (AODD) pumps handle a wide variety of fluids with a high or low solids content for smooth, consistent, efficient pumping. Flow rate to 107 GPM max, 1.5 in. ANSI flanged ports, 1/2 in. FNPT air inlet. Choose polypropylene, aluminum, stainless steel, cast iron or PVDF for the pump body material, ball valves as standard. Choose the diaphragm material based on the maximum liquid temperature:
Neoprene to 180 degrees F
Buna 180
PTFE 212
Nordel 212
Santoprene 225
Hytrel 248
Viton 248
Call or chat for free guidance!

From
$1,062.20$5,292.20
Select options
Sethco 2500 pumps
Sethco 2500 Series Magnetic Drive Self-Priming Pumps

Sethco 2500 Series magnetic drive self-priming pumps are offered in a wide range of specifications. Click on the model number or to find out the model needed use the selector menu. Choose from glass-reinforced polypropylene or PVDF, the motor phase, max flow and max head, and the motor HP. Or call or chat for free guidance! These Sethco pumps are ideal for pumping, transferring and filtering acids, caustics, bleaches and more and are the frequent choice in water, wastewater, agriculture, metal finishing and aquatic systems. Max flow rate to 225 GPM with a max head of 105 with a 2-in. inlet /outlet.

From
$7,438.20$10,602.62
Select options
Yamada pumps NDP-50 series in aluminum
Yamada NDP-50 Series 2 in. Pumps

Yamada 2-inch, air-operated, double-diaphragm (AODD) pumps handle a wide variety of fluids with a high or low solids content for smooth, consistent, efficient pumping. Flow rate to 164 GPM max, 2-in. ANSI flanged ports, 3/4 in. FNPT air inlet. Choose polypropylene, aluminum, stainless steel, cast iron or PVDF for the pump body material, ball valves as standard. Choose the diaphragm material based on the maximum liquid temperature:
Neoprene to 180 degrees F
Buna 180
PTFE 212
Nordel 212
Santoprene 225
Viton 248
Hytrel 248
Hytrel 248
Viton 248
Call or chat for free guidance!

From
$1,301.90$7,369.60
Select options
Yamada NDP-80 pump poly
Yamada NDP-80 Series 3-Inch Pumps

Yamada 3-inch, air-operated, double-diaphragm (AODD) pumps handle a wide variety of fluids with a high or low solids content for smooth, consistent, efficient pumping. Flow rate to 215 GPM max, 3-inch. ANSI flanged ports, 3/4 in. FNPT air inlet; 3-inch FNPT port for cast iron. Choose polypropylene, aluminum, stainless steel, cast iron or PVDF for the pump body material, ball valves as standard. Choose the diaphragm material based on the maximum liquid temperature:
Neoprene to 180 degrees F
Buna 180
PTFE 212
Nordel 212
Santoprene 225
Hytrel 248
Viton 248
Call or chat for free guidance!

From
$1,955.20$9,221.40
Select options
Wilden PX8 plastic pumps from Reliable Equipment Sales
Wilden P8 Plastic Pumps 2-Inch

Wilden 2-inch, air-operated, double-diaphragm (AODD) plastic pumps in the P8 and PX8 Original Series install fast and easily and provide a rugged, reliable design in a robust disposition for a wide range of demanding process applications. P8 flow rate to 170 GPM with a choice of air inlet sizes. Choose the elastomer based on its temperature limit:
Buna 10 - 180 degrees F
Neoprene 0 - 200
PTFE 40 - 300
Wil-Flex minus 40 - 225

From
$4,217.05$5,112.90
Select options